Creating Command Aliases on Cisco Router


Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config) #alias exec rt show ip route
Router(config) #alias exec on show ip ospf neighbor
Router(config) #end
Router#

Router#show aliases
Exec mode aliases:
h help
lo logout
p ping
r resume
s show
u undebug
un undebug
w where
rt show ip route
on show ip ospf neighbor
Router#

Redhat (centos) network interface configuration


Redhat Linux network interface names start with ethX. First Ethernet network interface name is eth0, second is eth1 and so on.
Login as a root user, use su - command:
$ su -
To list or display more information about network interface type command:
# ifconfig | less
To assign an IP address type following command:
# ifconfig eth0 192.168.1.1 up
To take down network interface type following command:
# ifconfig eth0 down
To configure network card using GUI tool type command:
# redhat-config-network
You can also type command setup and select network configuration from menu:
# setup
If you wish to configure network interface manually then you need to edit files stored in /etc/sysconfig/network-scripts/ directory. For example here is my sample /etc/sysconfig/network-scripts/ifcfg-eth0 file for eth0 network interface:
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.1.255
HWADDR=00:0F:EA:91:04:07
IPADDR=192.168.1.111
NETMASK=255.255.255.0
NETWORK=192.168.1.0
ONBOOT=yes
TYPE=Ethernet