[1] | Set static IP address to the server, DHCP is not recommended if you use as a server, Change it. |
[root@dlp ~]#
vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
[root@dlp ~]# HWADDR=00:50:43:00:3B:AE
# change
ONBOOT=
yes
# add lines as follows
BOOTPROTO=none
# this server's IP address
IPADDR=10.0.0.30
# subnet mask
NETMASK=255.255.255.0 TYPE=Ethernet
# default gateway
GATEWAY=10.0.0.1
# DNS server's IP address
DNS1=10.0.0.10 IPV6INIT=no USERCTL=no
/etc/rc.d/init.d/network restart
Shutting down interface eth0:
[ OK ]
Shutting down loopback interface:
[ OK ]
Bringing up loopback interface:
[ OK ]
Bringing up interface eth0:
[ OK ]
[root@dlp ~]#
chkconfig network on
[root@dlp ~]#
ifconfig
eth0
Link encap:Ethernet HWaddr 00:0C:29:D8:7C:06
inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fed8:7c06/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:885 errors:0 dropped:0 overruns:0 frame:0
TX packets:743 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83054 (81.1 KiB) TX bytes:113706 (111.0 KiB)
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
|
[2] | Disable IPv6 if you don't need it. |
[root@dlp ~]#
ifconfig
eth0
Link encap:Ethernet HWaddr 00:0C:29:D8:7C:06
inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fed8:7c06/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:885 errors:0 dropped:0 overruns:0 frame:0
TX packets:743 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83054 (81.1 KiB) TX bytes:113706 (111.0 KiB)
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@dlp ~]#
echo "install ipv6 /bin/true" > /etc/modprobe.d/disable-ipv6.conf
[root@dlp ~]#
[root@dlp ~]#
reboot
# reboot
ifconfig
eth0
Link encap:Ethernet HWaddr 00:0C:29:D8:7C:06
inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:885 errors:0 dropped:0 overruns:0 frame:0
TX packets:743 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:83054 (81.1 KiB) TX bytes:113706 (111.0 KiB)
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
|